Timber Sheds Specifications

Eagle Sheds: tel: 01304 612258

fax: 01304 613785

Ramsgate Road Sandwich

Kent CT13 9ND

Sheds - Specifications

OTHER SPECIFICATIONS ARE POSSIBLE - PLEASE ASK FOR A QUOTATION

Frame Work sheds and Eagle Cabin 38 x 75mm
All other models 38 x 50mm
Cladding Shiplap is 16 x 125mm
Weatherboard is 22 x 125mm
Floor Joists Work shed 38 x 75mm
All other models 32 x 32mm
Floor Weatherboard garden sheds 16mm sawn boards.
All other models 19mm tongued and grooved.
Roof Summerhouses and Octavia shed: Shiplap
All other models 16mm planed and rebated boards
Roofing Felt 20 kg green mineral finish
Door 16mm tongued and grooved boards
Door Fastener Summerhouses and Octavia shed: rimlock
Work shed: padbolt
Cabin: mortice lock
All other models: turn button
Hinges Doors can be hinged right or left

Reductions are available for sheds

  • Which do not have a floor and / or are without some other part or section.
  • Which are collected from our Sandwich factory instead of being delivered.
  • Please ask our sales office for details.
Eagle Sheds - Preservatives and Timber

Preservatives

All Eagle Sheds are treated with preservative prior to delivery.

Unlined sheds are immersed in a tank.

Sheds lined with tar paper are brushed.

Summerhouses are brushed with Red Cedar preservative.

All timbers in contact with the ground are vacuum pressure treated for long term rot protection.

Coloured preservatives are available at extra cost.

Cladding Timber

Eagle sheds are available in two different claddings:

Shiplap:
shiplap
Boards which have been planed and moulded to a pattern which has a tongue at the top of each board and a rebate at the bottom.

Weatherboard:
weaterboard
Two wedge shaped boards are produced by sawing one thicker board diagonally.

These are then fixed to the shed with the thick edge at the bottom overlapping the thin edge of the next board.

The finished boards have a sawn surface, giving a rustic look.

Garden sheds

Designed & Hosted by Open Sandwich Design 2007